Belden 20 AWG Coaxial Cable RG-59U 1000 ft
Belden 1505A is an ideal coaxial cable suitable for the transmission of digital streams, such as SMPTE 2081-1 6 Gb/s UHDTV and SMPTE 424M 3 Gb/s HD-SDI 1080p. Its small overall diameter (0.233 inches) makes efficient use of space in wireways, cable trays and conduit. This item is a 1,000 foot (304.8 m) reel of 1505A cable.
General Specifications:
- Conductor: 20 AWG solid .032" bare copper
- Insulation: Gas-injected FHDPE - Foam High Density Polyethylene
- Shielding: Duofoil® + tinned copper braid shield (95% coverage). The Duofoil® shield is composed of metallic foil, which is applied to both sides of a polyester film.
- Jacket: PVC (Polyvinyl Chloride)
Additional Specifications:
- Impedance: 75 Ohm
- Overall Nominal Diameter: 0.233 inches
- Maximum Recommended Pulling Tension: 52 lbs.
- Minimum Bend Radius/Minor Axis: 2.500 inches
- Specs
- AWG
- 20 AWG .032 Inch Bare Copper
- Outer Diameter (OD)
- 0.233 Inches (Nominal)
- Stranding
- Solid
- Shielding
- Duofoil® + Tinned Copper Braid
- # of Conductors
- 1
- Length
- 1,000 ft. (305m)
- Weight
- 35 lbs (1,000 ft. Reel)
- Plenum (Y/N)
- No
Please refer to the link below if you would like to see further technical specifications, details and information:
Belden Blog post on the development of proper 75 Ohm connectors for digital signal use
Please see the "Tech Specs" tab for additional information on the Belden 20 AWG Coaxial Cable RG-59U 1000 ft.
To see more Belden products available on the Broadcast Integration Services website, please click or tap here.
Technical Specifications: Belden 20 AWG Coaxial Cable RG-59U 1000 ft
Belden 1505A is an ideal coaxial cable suitable for the transmission of digital streams, such as SMPTE 2081-1 6 Gb/s UHDTV and SMPTE 424M 3 Gb/s HD-SDI 1080p. Its small overall diameter (0.233 inches) makes efficient use of space in wireways, cable trays and conduit. This item is a 1,000 foot (304.8 m) reel of 1505A cable.
General Specifications:
- Conductor: 20 AWG solid .032" bare copper
- Insulation: Gas-injected FHDPE - Foam High Density Polyethylene
- Shielding: Duofoil® + tinned copper braid shield (95% coverage). The Duofoil® shield is composed of metallic foil, which is applied to both sides of a polyester film.
- Jacket: PVC (Polyvinyl Chloride)
Additional Specifications:
- Impedance: 75 Ohm
- Overall Nominal Diameter: 0.233 inches
- Maximum Recommended Pulling Tension: 52 lbs.
- Minimum Bend Radius/Minor Axis: 2.500 inches
- Specs
- AWG
- 20 AWG .032 Inch Bare Copper
- Outer Diameter (OD)
- 0.233 Inches (Nominal)
- Stranding
- Solid
- Shielding
- Duofoil® + Tinned Copper Braid
- # of Conductors
- 1
- Length
- 1,000 ft. (305m)
- Weight
- 35 lbs (1,000 ft. Reel)
- Plenum (Y/N)
- No
Please refer to the link below if you would like to see further technical specifications, details and information:
Belden Blog post on the development of proper 75 Ohm connectors for digital signal use