Marshall 2.0 MP High Resolution Encoder & Decoder w/ HD-SDI
The Marshall VS-102-HDSDI is a High Definition Video Server that allows real-time transmission of an SD/HD-SDI, HDMI, or NTSC/PAL composite video signal along with bi-directional AAC encoded high definition stereo audio over standard IP networks and the internet. The Marshall VS-102-HDSDI incorporates advanced H.264 and MJPEG compression technology. This allows 50% more compression capacity over an existing IP Network, while providing optimal video transmission quality even in networks with limited bandwidth.
The VS-102-HDSDI may be configured to operate as a Point-to-Point talent monitoring system. For example, the unit can operate as an encoder to compress and transmit A/V data over a LAN to another VS-102-HDSDI located in a Green Room or other location. The other unit can act as a decoder which receives the compressed data through the LAN and restores the data to its' original high definition state. Additionally, other computers or VS-102-HDSDI decoders connected to the same network can monitor both the audio and video in multiple locations throughout a venue such as dressing rooms, stage manager, or other area at the same time. When properly configured, the VS-102-HDSDI may be simultaneously monitored through the internet.
Check out the extensive list of features in the Marshall VS-102-HDSDI!
VS-102-HDSDI Features
- High Quality AV Encoder / Decoder (User Selectable)
- Full HD resolution 1080p Encoding / Decoding
- Up to 30fps @ 1920 x 1080 streaming
- H.264 & H.264 MJPEG Dual Streaming
- Two-Way Audio Communication
- Mono Codec G.711 for Security applications
- Stereo Codec AAC for Broadcast applications
- HD-SDI Video Input / Output
- HDMI Video Input / Output
- Composite Video Input / Output
- Audio Input / Output
- Instant Recording to an optional USB drive (USB 2.0)
- Built-in PoE (Power Over Ethernet: 802af)
- RS-232 & RS-422/485 control built-in
- Integrated Video Motion Detection
- Transmission of Video Data through FTP server
- Wide Range of Video Bit Rate Control (32kbps ~ 10Mbps)
- PSIA and ONVIF compliant
- Specs
- System Mode
- Encoder, Decoder
- Network Interface
- Ethernet 10 / 100Base-T (RJ-45)
- Network Protocol
- TCP/IP
- UDP
- Multicast
- DHCP
- SMTP
- HTTP
- SNMP
- RTP
- RTSP
- Standards
- Main Stream: H.264
- Secondary Stream: H.264/MJPEG
- Bitrate
- 32 ~ 10,240 Kbps
- Resolution
- 1920x1080/60i ~ 352x240/30fps, 18 resolution step
- Frame Rate Range
- 1 ~ 30fps
- Video Inputs & Outputs
- Input 1
- 1 x HDMI type-A, HDMI RX
- Input 2
- 1 x BNC: HD-SDI
- Output 1
- 1 x HDMI type-A, HDMI TX
- Output 2
- 1 x BNC: HD-SDI
- Audio Input & Output
- Input
- 1 x Line-In (Mini-Stereo)
- Output
- 1 x Line-Out (Mini-Stereo)
- Power
- Source
- DC 12V/0.8A, PoE(Power over Ethernet): 802.3af
- Consumption
- Max 9.6W
- Dimensions
- Rack Unit Dimensions (WHD)
- 5.3" x 5" x 1.4"
- Shipping
- Weight (approx.)
- 3 lbs.
Please see the "Tech Specs" tab for additional information on the Marshall 2.0 MP High Resolution Encoder & Decoder w/ HD-SDI.
To see more Marshall products available on the Broadcast Integration Services website, please click or tap here.
Technical Specifications: Marshall 2.0 MP High Resolution Encoder & Decoder w/ HD-SDI
The Marshall VS-102-HDSDI is a High Definition Video Server that allows real-time transmission of an SD/HD-SDI, HDMI, or NTSC/PAL composite video signal along with bi-directional AAC encoded high definition stereo audio over standard IP networks and the internet. The Marshall VS-102-HDSDI incorporates advanced H.264 and MJPEG compression technology. This allows 50% more compression capacity over an existing IP Network, while providing optimal video transmission quality even in networks with limited bandwidth.
The VS-102-HDSDI may be configured to operate as a Point-to-Point talent monitoring system. For example, the unit can operate as an encoder to compress and transmit A/V data over a LAN to another VS-102-HDSDI located in a Green Room or other location. The other unit can act as a decoder which receives the compressed data through the LAN and restores the data to its' original high definition state. Additionally, other computers or VS-102-HDSDI decoders connected to the same network can monitor both the audio and video in multiple locations throughout a venue such as dressing rooms, stage manager, or other area at the same time. When properly configured, the VS-102-HDSDI may be simultaneously monitored through the internet.
Check out the extensive list of features in the Marshall VS-102-HDSDI!
VS-102-HDSDI Features
- High Quality AV Encoder / Decoder (User Selectable)
- Full HD resolution 1080p Encoding / Decoding
- Up to 30fps @ 1920 x 1080 streaming
- H.264 & H.264 MJPEG Dual Streaming
- Two-Way Audio Communication
- Mono Codec G.711 for Security applications
- Stereo Codec AAC for Broadcast applications
- HD-SDI Video Input / Output
- HDMI Video Input / Output
- Composite Video Input / Output
- Audio Input / Output
- Instant Recording to an optional USB drive (USB 2.0)
- Built-in PoE (Power Over Ethernet: 802af)
- RS-232 & RS-422/485 control built-in
- Integrated Video Motion Detection
- Transmission of Video Data through FTP server
- Wide Range of Video Bit Rate Control (32kbps ~ 10Mbps)
- PSIA and ONVIF compliant
- Specs
- System Mode
- Encoder, Decoder
- Network Interface
- Ethernet 10 / 100Base-T (RJ-45)
- Network Protocol
- TCP/IP
- UDP
- Multicast
- DHCP
- SMTP
- HTTP
- SNMP
- RTP
- RTSP
- Standards
- Main Stream: H.264
- Secondary Stream: H.264/MJPEG
- Bitrate
- 32 ~ 10,240 Kbps
- Resolution
- 1920x1080/60i ~ 352x240/30fps, 18 resolution step
- Frame Rate Range
- 1 ~ 30fps
- Video Inputs & Outputs
- Input 1
- 1 x HDMI type-A, HDMI RX
- Input 2
- 1 x BNC: HD-SDI
- Output 1
- 1 x HDMI type-A, HDMI TX
- Output 2
- 1 x BNC: HD-SDI
- Audio Input & Output
- Input
- 1 x Line-In (Mini-Stereo)
- Output
- 1 x Line-Out (Mini-Stereo)
- Power
- Source
- DC 12V/0.8A, PoE(Power over Ethernet): 802.3af
- Consumption
- Max 9.6W
- Dimensions
- Rack Unit Dimensions (WHD)
- 5.3" x 5" x 1.4"
- Shipping
- Weight (approx.)
- 3 lbs.